CASIO SEC300 Cash Register Setup Guide Leave a comment

CASIO SE-C300 Cash Register Setup Guide

MAC Clear ECR

NOTE : THIS COMPLETELY WIPES THE MACHINE!

Set mode switch to off
Hold Down the [FEED] button
Turn Key to PGM while still holding down the [FEED] button
After 5 seconds release the [FEED] button
‘0000000000’ will appear on the display and the register is now ready to receive it’s MAC code
Enter 17240 for dept buttons or 10040 for plu buttons
Press Sub Total
(Wait for a bit… the register will go into program mode and the display will read 0.00 when its done)
Insert Memory Batteries

Set Register For Australian GST


Turn Key to X Enter 01012001 Press Sub Total Press Cash

Set ECR to operate as Receipt or Journal

Turn Key to Program Press 1
Press Sub Total Press 10 (for Journal) Press [CH] Key
Press Sub Total

Set Time

Turn Key to Program
or 0 (for Receipt)
Enter time in 24 hr format HH:MM eg 4:30pm = 16:30 Press the” X/Date Time” Key
Press “Clear” [C] Key

Set Date

Turn Key to Program
Enter date as YY:MM:DD Press the “X/Date Time” Key Press “Clear” [C] Key

Set GST for Departments

Turn Key to PGM
Enter 1 Press Subtotal (PGM 1)
Press TAX PGM until the tax you want is selected (01 for GST, 00 for no tax) Press Departments
Press Subtotal when finished ALL

Set Prices for Departments

Turn Key to PGM
Enter 1 Press Subtotal (PGM 1)
Enter Price without using decimal point e.g. 150 =$1.50 Press the Department Key you want to set the price against Press Subtotal when finished ALL

Set Names of Departments

Turn Key to PGM
Enter 2 Press Subtotal (PGM 2)
Press the Department key that you want to name eg Department 1
Use the Numeric Keys to choose the letters you want to use. There are 3 letters on the leading edge of each key. To move to the next letter use the arrow on the 00 key. Press Cash
Press Subtotal when finished ALL

Leave comments below if you need more assistance.

Leave a Reply

Your email address will not be published. Required fields are marked *